forging special 1 2379 tool steel DIN 2316 stainless steel d3 steel
D2 Tool Steel 1.2379 SKD11 Tool Steel
Cold Works D2 tool steel is a high carbon, high chromium tool steel (12% chrome) with extremely high wear resisting properties, heat treatable to 60-62 Rc. D2 steel is very wear resistant but not as tough as lower alloyed steels. D2 tool steel hardens in air with a low order of movement and offers a measure of corrosion resistance when polished.
D2 Tool Steel 1.2379 X153CrMo12 Cr12MoV SKD11
SAE D2 tool steel is a high carbon (1.4-1.6% C), high chromium Cold tool steel (11-13% chrome), and with Very high wear resisting properties, heat treatment can be reached to 60-62 HRc. D2 steel have very wear resistant property but not as tough as lower alloy steel.
2316 Steel Wholesale, Steel Suppliers
Milling surface mild steel D3 round bars 1.244 tool steel flat rod mold stainless steel 2316 plate
DIN 1.2379 Tool Steel
DIN 1.2379 Tool Steel D-2 offers excellent resistant to wear and abrasion and is used in long-run applications when resistance to wear is required.D-3 is machinalble in the annealed condition.S-2 shows minimal distortion during heat treatment.
Sinssen Special Steel Co., Ltd
Sinssen Special Steel Co., Ltd base years' experience in tool steel area to offer professionl tool steel solution. ... Alloy Tool Steel DIN 1.2316/S136 Mould Steel ... D2 H13 1.2344 1.2080 1.2379 D3 Alloy Steel Featured Product Contact now ...
3, DIN.EN 1.2379 steel. 4, KS STD11 cold work steel. D2 tool steel heat treatment. Forging of D2 die steel; Pre heat to 700 °C, Then rapidly heat to 900-1040 °C. Start forge the D2 steel fabrication. Annealing of D2 cold work tool steel; Heat to 900 °C, soak enough time. cool in furnace until to room temperature. Quenching of AISI D2 tool steel
1.2379 Tool Steel
1.2379 tool steel china supplier and wholesalers , Otai Special Steel supply the 1.2379 in Round bar, Plate, Flat bar, Square bar, and others customize sharp, steel sections and form.
1.2379 / X153CrMoV12 Steel
1.2379 / X153CrMoV12. DIN 1.2379 / X153CrMoV12 Steel is a high carbon and high chromium type cold work tool steel. The Molybdenum and Vanadium compositon of din 1.2379 is more than 1.2601 steel. X153CrMoV12 steel has higher strength and toughness,which makes the comprehensive performance of 1.2379 steel better.
1.2379 Tool Steel
1.2379 Tool Steel. 1.2379 AISI D2 is a high carbon, high chromium, molybdenum, vanadium, air hardening tool steel which offershigh surface hardness, good wear resistance, through hardening properties, dimensional stability and high resistance to tempering effect. 1.2379 X155CrVMo12-1 tool steel is also suitable for vacuum hardening.
1.2080 / X210Cr12 Steel
1.2080 / X210Cr12. DIN 1.2080 / X210Cr12 Steel is a high Carbon and high Chromium cold work tool steel. The 1.2080 steel has good hardenability and wear resistance. But due to the carbon content of X210Cr12 steel is high,which makes this material hard and brittle.
H13 Tool Steel 1.2344 SKD61 Hot Work Steel
Tool Steel H13 has good machinability, good weldability, good ductility, and can be formed by conventional means. Due to H13 tool steel excellent combination of high toughness and fatigue resistance, AISI H13 hot work tool steel is used more than any other tool steel in tooling applications. 1. Supply Range for AISI H13 Tool Steel
1.2379 Tool Steel
1.2379 steel suppliers and stockholders delivering to the whole of the UK. West Yorkshire Steel are suppliers of 1.2379 high carbon, high chromium tool steel in round bar, plate, sheet and block which can be bandsaw cut to your requirements.
About US_High speed steel Forging 1.2344 |1.2379M2 ...
Sanguan Special Steels dominant products such as cold-work tool steel, hot- work tool steel, plastic mold steel, high speed steel, alloy structure steel, stainless steel which can provide services to coal, electricity, machinery manufacture, railway transportation and other industries.
DIN 1.2550 / AISI S1 tool steel
Steel properties A shock resisting steel it is suited for both hot and cold work applications. The tungsten content of this steel grade confers fatigue resistance, the chromium content provides depth of hardness and resistance to abrasion.
Quality Tool Steel-Fuhong Forging experts
Tool Steel. Tool steel is used to fabricate tooling exposed to stress that cannot always be defined precisely in the design phase. Tool steels include cold work tool steels, hot work tool steels and plastics mould steels.
Tool Steel DIN 1.2379
SAAJ STEEL CORPORATION was established in the year 1997. The concern promotes trading of special steels. We are specialist in High speed steel, Hot die steel, Cold work tool steel, High carbon high chromium tool steel, Alloy steel, Carbon steel, Forging steel, and Bright bars.
ALTA Special Steel Co., Tool Steel, D2 tool steel, H13 ...
ALTA Special Steel Co., Tool Steel, D2 tool steel, H13 tool steel, 1.2344 tool steel, 1.2379 tool steel, O1 tool steel, 1.2510 tool steel, A2 tool steel, 4140/4340 alloy steel, 42CrMo4/34CrNiMo6 alloy steel ... DIN 1.2316 / AISI 422... DIN 1.2738 / AISI P20+Ni... DIN 1.3343 / AISI M2 ... Technical Study on surface Quality and Non ...
1.2080 esr tool steel
Stainless Steel BarsDIN 1.2080 / AISI D3 Tool SteelALTA SPECIAL STEEL supply DIN 1.2080 / AISI D3 Tool Steel in round bar, plate, square, sheet and block. DIN 1.2316 / AISI 422 Plastic Mould Steel ALTA SPECIAL STEEL supply DIN 1.2316 / AISI 422 Plastic Mould Steel in …
China D2 1.2379 D3 1.2080 D6 1.2436 H13 1.2344 Tool Steel ...
1.2379 Tool Steel Round Bar, SKD11 Tool Steel Round Bar, Cr12Mo1V1 Tool Steel Round Bar manufacturer / supplier in China, offering D2 1.2379 D3 1.2080 D6 1.2436 H13 1.2344 Tool Steel, 1.2738 1.2311 1.2312 P20 1.2316 1.2083 Round Sheet Flat Steel, 51100 52100 534A99 Suj1 1.3505 105cr4 100cr6 Bearing Steel Bar and so on.
Din 1.2316 plastic mould steel, View 1.2316 steel, Yaoteng ...
din 1 2316 plastic mould steel . 1.2316 tool steel in round bar, flat bar and plate in full lengths or bandsaw cut. 1.2316 is a chromium alloyed stainless plastic mould steel, which is characterised by good polishability, good hardenability with high hardness achievable after heat treatment.
1 2379 D2 SKD11 Properties Samantha Perera
Pipe Material(Grade) Chemical Compostion 1.2379 AISI D2 is a high carbon, high chromium, molybdenum, vanadium, air hardening tool steel which offershigh surface Mechanical Properties hardness, good wear resistance, through hardening properties, dimensional stability and high resistance to tempering effect. 1.2379 X155CrVMo12-1 tool steel is ...
Tool steel H13 D2 A8 DC53 1.2343 1.2379 1.2550 acero ...
Huangshi Better International Trade Co., Ltd is established in 2014 in China. Our belief is "Create a better company".Better's main business range covers tool steels, mold steels and machine parts. Thanks to the common value, Better has established firm partnership with qualified steel factories and machine manufacturing factories. &nbs
Tool Steel Interlloy Engineering Steels + Alloys
Plastic mould steel that is usually supplied in a hardened and tempered condition. Suitable for Plastic moulds, frames for plastic pressure dies, hydroforming tools. See the datasheet here >
Steelinox Stainless Steel AISI 440B / 1.4112 ...
C 0,85 - 0,95 Cr 17,00 - 19,00 Mo 0,90 - 1,30 V 0,07 - 0,12 . 1.4112 - AISI 440B is designed to provide stainless properties with excellent hardness. In some respects it behaves similary to tool steel. 1.4112 - AISI 440B resists corrosion from mild atmospheres, fresh water steam, ammonia, many petroleum products and organic materials and several mild acid
18CrNiMo6 Steel Bar, View 18CrNiMo6 steel bar, liaofu, …
18CrNiMo6 Steel Bar, US $ 1,300 - 1,600 / Ton, 4317/17CrNiMo6 17Cr2Ni2Mo Alloy Steel, AISI, ASTM, DIN, JIS, 10-900MM.Source from Sichuan Liaofu Special Steel Trading ...
China Tool Steel manufacturer, Alloy Steel, Alloy Steel ...
D2 H13 1.2344 1.2080 1.2379 D3 Alloy Steel ... Cr12MOV/ AISI D2/JIS SKD11/ DIN 1.2379 Cold Work Tool Steel FOB Price US $700-1,500 / Ton ... Ltd has been supplying special steels. The range of special steels we supply covers steels for hot work tool steel, cold work tool steel, plastic mould steel, carbon steel and high speed steel(HSS). ...
China DIN 1.2379, D2 Cold Work Tool Steel Round Bar ...
Hot Rolled Steel Bar, Forged Steel Round Bar, Round Steel Bar manufacturer / supplier in China, offering DIN 1.2379, D2 Cold Work Tool Steel Round Bar, ASTM Standard 2218 Aluminum Alloy Circle Plate, 5082 Aluminium Circle Plate Price Per Kg and so on.
Huangshi Youli Special Steel Co., Ltd.
A.hot work tool steel B.cold work tool steel C.high speed die steel C.high speed die steel D.plastic mould steel E.daye specail steel our brand steel H13 D2 D3 L6 O1 P20 D6 1.2344 1.2343 1.2379 1.2080 1.2713 1.2714 EN31 DC53 SKT1 SKD61 SKD11 SKT4 4140 718 4340 round diameter 50-600mm flat. thickness 20-400mm width.80-1000mm Sales market