Our Product Range

the leading stockiest, importers, exporters & suppliers of Steel Plates, Steel Tubes

1 2379 aisi d2 cold work

D2 Tool Steel 1.2379 X153CrMo12 Cr12MoV SKD11

D2 Tool Steel 1.2379 X153CrMo12 Cr12MoV SKD11. Cold work D2 tool steel hardens in air with a low order of movement and offers a measure of corrosion resistance while polished. The high chromium percentage gives it nice corrosion-resisting properties in the hardened condition and low temperature.

1.2379 / X153CrMoV12 Steel

DIN 1.2379 / X153CrMoV12 Steel is a high carbon and high chromium type cold work tool steel. The Molybdenum and Vanadium compositon of din 1.2379 is more than 1.2601 steel. X153CrMoV12 steel has higher strength and toughness,which makes the comprehensive performance of 1.2379 steel better. C 1.45-1.60; Si 0.10-0.60; Mn 0.20-0.60; P max0.030;

Cold Work Tool Steel

D3 Cold Work Steel 1.2080 X210Cr12 SKD1. AISI D3 cold work steel, also know as DIN 1.2080 (Werkstoff) and JIS SKD1, is a 12% chrome alloy steel. D3 cold work steel has very high wear resistance against abrasive and adhesive wear.

D2 Tool Steel 1.2379 SKD11 Tool Steel

D2 Tool Steel 1.2379 X153CrMo12 SKD11 Jeremy He 2017-12-14T14:39:34+00:00 Project Description We are professional cold works D2 tool steel supplier for more than two decades.

1.2379

D2 Tool Steel 1.2379 Cr12MoV SKD11 steel. AISI D2 is a cold work tool steel.Cold work die steel D2 steel with high abrasion resistance, micro deformation, the wind hard tool steel, carbon content as high as 1.5%, chromium content as high as 11.5%, the heat treatment hardness can reach 60 HRC. Otai Special Steel are chinese d2 steel china supplier in steel round bar, plate, flat.

1.2379 Tool Steel D2

Heat Treatment and manufacture. Slowly Heat to 1065ºC~954ºC for Forging the 1.2379 cold work tool steel. No forge below 926ºC.

AISI D2 Cold Work Tool Steel Data Sheet

Cold work tool steel AISI D2. AISI D2 2 ... specification AISI D2, W.-Nr. 1.2379 Delivery condition Soft annealed to approx. 210 HB Color code Yellow/white General Forming HRC Tools for Bending, forming, deep-drawing, ... including the publications “Steels for Cold Work Tooling”.

AISI D2 AISI D2 Tool Steel AISI D2 Cold Work Tool Steel

AISI D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC.

1.2379 aisi d2 cold work tool steel specification, View ...

1.2379 aisi d2 cold work tool steel specification, US $ 800 - 1,500 / Ton, AISI, ASTM, BS, DIN, GB, JIS, GB/AISI/DIN/JIS, Alloy Steel, 20-400mm.Source from Huangshi Kangheng Industrial Corporation Limited on …

DIN 2379 Steel Din 1.2379 Tool Steel 1.2379 Steel Supplier

DIN 2379 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC.

1.2379 Tool Steel AISI D2

1.2379 X155CrVMo12-1 tool steel is also suitable for vacuum hardening. 1.2379 AISI D2 is one of the cold work, high carbon, high chromium type tool steels. D2 is a deep hardening, highly wear resistant alloy. It hardens upon air cooling so as to have minimum distortion after heat treatment.

DIN 1.2379 / AISI D2

Home > Cold Work Tool Steel > DIN 1.2379 / AISI D2 DIN 1.2379 / AISI D2. Product Name DIN 1.2379 / AISI D2; Model No. X155CrVMo12-1 Attachment download. Product Description. 1.2379 / D2 Cold Work Tool Steel. Standards. DIN. AISI. JIS.

Din 1.2379 Cold Work Tool Steel, Din 1.2379 Cold Work Tool ...

About 72% of these are steel round bars, 15% are steel sheets. A wide variety of din 1.2379 cold work tool steel options are available to you, such as astm, aisi, and gb. You can also choose from free samples. There are 384 din 1.2379 cold work tool steel suppliers, mainly located in Asia.

DIN 1.2379 / AISI D2

Chrome-molybdenum-vanadium steel with big hardenability for hardening in oil and in air, especially high resistance to the wear (higher than by 1.2080), good cutting power, very good firmness in the pressure, lower toughness (but higher than by 1.2080).

1.2379 Tool Steel AISI D2

1.2379 AISI D2 is one of the cold work, high carbon, high chromium type tool steels. D2 is a deep hardening, highly wear resistant alloy. D2 is a deep hardening, highly wear resistant alloy. It hardens upon air cooling so as to have minimum distortion after heat treatment .

D2, 1.2379 Cold Work Tool Steel, Alloy Tool Steel

Pre A2,1.2363 Cold work tool steel, alloy tool steel Next D3, 1.2080 Cold Work Tool Steel, Alloy Tool Steel

1.2379 Cold Work Tool Steel, 1.2379 Cold Work Tool Steel ...

offers 398 1.2379 cold work tool steel products. About 71% of these are steel round bars, 6% are flat steel, and 2% are other metals & metal products. A wide variety of 1.2379 cold work tool steel options are available to you, such as gb, aisi, and astm.

AISI D2 Tool Steel, 1.2379 steel, SKD11 cold work steel ...

AISI D2 Tool Steel, 1.2379 steel, SKD11 cold work steel . The History of YAOTENG STEEL •1995.10 Established alloy tool steel Plus workshops, beginning make the. mould steel cutting process •2001.7 Changed to limited liability company, have 8 set semi-automatic Bandsaw Cutting machinery and 3 set planing machine.

COLD WORK TOOL STEEL AISI D2

COLD WORK TOOL STEEL – AISI D2 AISI D2 Cold Work Tool Steel air or oil hardening, with maximum dimensional stability during heat treatment, offering very high hardness and abrasion resistance. Generally supplied annealed to HB 250 max. TYPICAL APPLICATIONS:

Mat.No. 1.2379, DIN X155CrVMo12-1, AISI D2

Mat.No. 1.2379, DIN X155CrVMo12-1, AISI D2 Short Description Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI OCR12 834 1.2379 X155CrVMo12-1 X160CrMoV121 D2 Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 1.53 0.35 0.40 12.00 1.0 - 0.85 - - DescriptionThis alloy is one of the cold work, high carbon, high chromium type tool steels.

HCHCR – D2 / AISI D2 / DIN 1.2379 – venturasteels

Ventura Alloy & Steels, trade in a wide spectrum of Tool and Alloy Steels segment products which include Cold Work Tool Steels, Hot Work Tool Steels, Spring Steels, Die …

D2 1.2379 SKD11_Cold Working Tool Steel_konsond

D2 1.2379 SKD11. These carbides provide good resistance to wear from sliding contact with other metals and abrasive materials. Although other steels with improved toughness or improved wear resistance are available, D2 provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms.

Bohler-Uddeholm AISI D2 Cold Work Tool Steel

AISI D2; W.-Nr. 1.2379, AISI D2 is a high-carbon, high-chromium tool steel alloyed with molybdenum and vanadium AISI AD2 is characterized by High wear resistance High compressive strength Good through-hardening properties High stability in

China DIN 1.2379, D2 Cold Work Tool Steel Round Bar ...

Hot Rolled Steel Bar, Forged Steel Round Bar, Round Steel Bar manufacturer / supplier in China, offering DIN 1.2379, D2 Cold Work Tool Steel Round Bar, ASTM Standard 2218 Aluminum Alloy Circle Plate, 5082 Aluminium Circle Plate Price Per Kg and so on.

EN/DIN 1.2379/ AISI ~ D2/ JIS ~ SKD 11

EN/DIN 1.2379/ AISI ~ D2/ JIS ~ SKD 11. Ledeburitic cold work steel with high chromium content. Can be nitrided and coated. Applications Rolls for forming and for cold and semi hot rolling. Combs and rolls for screw rolling. Body blanks and dies for automobile industry. Dies for injection of thermosets.

TOOL STEEL

1.2764/X19NiCrMo4 COLD WORK TOOL STEEL. ... Tool Steel SKD11/SLD/ DC11/AISI D2/2379/ O1 / 1.2510 / 100mncrw4 / sks3. 3X2B8Ф / 1.2581 / X30WCrV93 / AISI H21 / 1.2343 / AISI H11 STEEL / X38CrMoV51 / BÖ ... TOOL STEEL - HIGH SPEED STEEL - …

California Knife Knife Materials and Tool Steels, M2 HSS ...

AISI D2 Cold Work Tool Steel (DIN 1.2379) - High Carbon High Chromium (HCHC) Knife Steel California Knife & Blade manufactures and supplies quality industrial machine knives and blades completely manufactured from D2 (DIN 1.2379).



WANT TO KNOW MORE?
Email: